80XLE

Equipped with a telescoping boom that increases reach by up to 3 additional feet, the Barko 80XLE back of cab knuckleboom loader delivers an excellent power-to-weight ratio. Its maximum front lift capacity is 10,450 pounds.

DOWNLOAD SPEC SHEET

FEATURES

Power Source

The 80XLE is powered by a customer-supplied PTO.

Boom Construction

Wider, all-welded boom construction with fabricated box type design includes engineered sweeping curves for added strength and increased fatigue resistance.

Dedicated Swing Motor

A triple gear pump produces up to 62 gallons per minute, with one pump section dedicated to the planetary swing drive that allows simultaneous operation of the boom and swing system without losing flow.

360-Degree Rotation

Rotary manifold allows for 360-degree continuous boom rotation and provides electrical and hydraulic power to the lower frame.

Hydraulic Valves

Sectional control type valves come with folding mechanical joysticks.

Zinc Plated Pins

Extra large zinc plated pins and bolts provide added durability in high-stress areas.

Bolt-On Cylinder Glands

Bolt-on cylinder glands make on-site service easy, while seal rings extend product life. Cylinders are made of heavy-duty steel tubing, and heavy chrome cylinder rods are heat-treated for added strength.

Operator Platform

Comfortable operator platform includes a locking, fold-down seat with armrests. The rotating platform includes beneath-the-seat style valve mounting and foot swing pedal.

Standard Accessories

Mounting bolts and support plates are supplied. Loader is also equipped with load securing posts and dual ladders with non-slip treading.

Stabilizers

Telescopic stabilizers, controlled from the platform or the ground, help keep loads steady.

SPECIFICATIONS

DIMENSIONS

A-Frame Width	25.625″ (65 cm)
A-Frame Height	5′ 3″ (158 cm)
Stabilizer Width	10′ 3″ (312 cm)
Total Operating Weight	5,985 lbs (2,715 kg) loader with telescoping boom with cylinders (excluding grapple and options)
Additional Dimensions	Download spec sheet for additional product dimensions

TRAILER/TRUCK MOUNT

Stabilizers	Telescopic stabilizers with 43″ (109 cm) stroke cylinders enclosed in tubular and fabricated box style assembly with wear plates

POWER

Source	Customer supplied power take-off

HYDRAULICS

Tank	45 gal. (170 L) with suction and return line filters
Pump	Triple gear pump producing 26/21/15 GPM (98/79/57 LPM) at 1,600 RPM Triple gear pump producing 26/21/15 GPM (98/79/57 LPM) at 1,600 RPM
Operating Pressure	3,200 psi (220 bar) main system
Valves	Sectional control type with mechanical joysticks
Features	Heavy-wall tubing and 4-wire hose; independent swing system with direct-linked foot controls, rotary manifold to allow continuous rotation

BOOM

Structure	Fabricated box style design with all welded construction and wear plates; bronze bushing with grease grooves at boom pivot points; (2) 55W halogen work lamps on stick boom
Standard Boom	22′ to 25′ (671 to 762 cm) telescoping
Horizontal Reach	24′ 10″ (757 cm)
Vertical Reach	37′ 3″ (1,140 cm) from ground when mounted on 44″ (112 cm) truck frame
Cylinder Features	Hydraulic cylinders with spherical bearings and wear rings on glands and pistons; heavy wall honed steel tubing; heat-treated cylinder rods with heavy chrome plating; induction hardened rods and bolt-on glands
Main Boom Cylinder	5″ x 36″ (127 x 914 mm) with 3″ (76 mm) rod
Stick Boom Cylinder	5″ x 30″ (127 x 762 mm) with 2.5″ (63.5 mm) rod
Maximum Front Lift Capacity (25′ Boom)	10,450 lbs (4,740 kg) with 5′ (1.5 m) radius 9,540 lbs (4,327 kg) with 10′ (3.0 m) radius 6,370 lbs (2,889 kg) with 15′ (4.6 m) radius 4,670 lbs (2,118 kg) with 20′ (6.1 m) radius 1,250 lbs (566 kg) at full reach

SWING SYSTEM

Rotation	Continuous rotation on 27″ (686 mm) external tooth turntable bearing, powered by hydraulic motor and single stage planetary gearbox

OPTIONS

Accessories

Spacers to accommodate various frame heights
Oil cooler kit with 12-volt fan
Left hand platform
55W halogen work lamps